2 Easily completed these tasks!1. Enable Remote Deskoptimal, and also permit the Mark account to connect using a Remote Deskoptimal connection. 2. Connumber the Local Area Connection network connection via static IPv4 address information for the /24 subnet: Use the last valid attend to on the subnet for the hold attend to. Use the first valid resolve on the subnet for the default gatemethod. 3. Configure the Local Area Connection netjob-related connection to use the complying with DNS server addresses: (desired DNS server) (initially alternative DNS server) (second alternative DNS server) 4. Create a wiremuch less profile to attach to a wiremuch less network-related that is not broadcasting. Use the following settings: SSID = SunFire3BG Security kind = WPA2-Personal Encryption = AES Security vital = abcde12345 Connumber the connection to connect instantly also if the netoccupational is not broadspreading. Easily completed these tasks! 1
3 Easily completed these tasks!1. Turn on Windows Firewall and make the adhering to configurations: Disable Network-related Discoexceptionally Add an exemption for a program and also permit the Sams545 application (select the application from the list of mounted applications). Add port exceptions to permit communications from the MathWizOnline application through the firewall. The regimen provides UDP ports 5943 and (Choose your own name for the port exceptions you produce.) 2. Configure the Local Area Connection network-related connection to usage the adhering to TCP/IP configuration: Connumber the adapter to attain IP and DNS addresses instantly. Copy the static configuration settings to create an different TCP/IP link. Share the Net link on the Local Area Connection netoccupational link, and also enable all individuals to control the link. Easily completed these tasks! 2
4 You are in charge of a small network as displayed in the ExhibitYou are in charge of a little netjob-related as displayed in the Exhilittle. The netoccupational is connected to the Web and also offers DHCP for resolve assignment. A user reports that his workterminal deserve to only communicate via some computers. Use the output for the ipconfig command to determine the difficulty. After identifying the problem, what activity have to you take? Click the Done switch once you have uncovered the information you require and answer the question. ANSWER: After running IPConfig, you can view that a wrong default gatemeans is configured. The answer is to collection proper DG on DHCP Server. 3
5 PC1 cannot interact through any type of devices out on the InternetPC1 cannot connect with any type of devices out on the Net. Use the ping command also from PC1 and also PC2 to recognize the trouble. After identifying the trouble, what activity must you take? Click the Done button once you have uncovered the indevelopment you need and answer the question. ANSWER: Can"t ping previous the other side of the rexternal. Many logical answer is Rebegin the Default Gatemeans (Router) instead of various other answer choices…replacing cables between devices!) 4
6 5 Use the tracert command also from Wrk1 to answer the following questions:How many routers are in the route in between Wrk1 and also Wrk3? What is the default gatemethod address for Wrk1? What is the IP resolve of the last router in the course between Wrk1 and Wrk3? Click the Done switch when you have found the information you have to answer the questions. (Very easy question!) 5
7 You are purchasing a wiremuch less AP for a customer and want to attain 54Mbps. Client is using 2.4GHz wiremuch less phones! Choices are : a , b, g, b/g and also a/n dual-band also I chose a and also a/n dual-band also. (b is just 11Mbps and also g operates at 2.4GHz) 6
8 The MOBO Quick Ethernet NIC passed away and you have to rearea it via an add-on. Has a photo of a PCI slot. Choices: 10Base2/Something NIC 1000BaseTX (PCIe) 100BaseTX(PCI) 100BaseTX(PCIe) Something else 7
9 8. You have actually simply signed up for Internet accessibility from NETSpeed, your regional cable TV provider. To access the Internet, you are responsible for picking and also connecting the tool to bridge the link from the wall plate to your computer system. Consider: Use the fastest connection speed easily accessible. The wall plate has a jack, and also the PC has actually an Ethernet LAN port. ANSWERS: A=RG-6 Cable Modem/Rexternal B= STP Cat 5 Cable (Not certain why they’re using STP, but…) Netjob-related Device?? Cable TypeA??? Cable TypeB??? 8
10 9 Install correct netjob-related tools.
You are watching: You have a small network connected to the internet as shown in the exhibit
The computer systems and also laptop computers should interact with other gadgets outside of their regional subnet. Subnet 1 should have guaranteed bandwidth to each computer system. Harmful network website traffic from the Net have to be filtered. Choices: Hub, switch, AP, Router w/FW, Rexternal w/o FW, Bridge ANSWERS: A=Switch B=Rexternal w/FW C=Hub D=WAP Web Network Device A? Network-related Device B? Network-related Device C? Network-related Device D? 9 Wiremuch less
11 You should have phone conversations transmitted over the existing information net making use of VOIP.Use the phone"s ports to daisy chain the Computers to the rest of the net. Do not usage the continual power outallows to power phones. Reduce the packet delay as much as feasible. **This was most likely the most confusing question for me. I knew that I was going to usage UTP to daisy chain the phones for the initially bullet. I kbrand-new that I would need to use PoE for the second bullet. I figured I would usage a QoS for the 3rd bullet. I knew Network Device B obviously had to be a VoIP phone. However before, that left me selecting one tool for Netjob-related Device A. Both a rexternal and a switch with QoS was an alternative, however I still needed PoE! :-/ My Answers: Device A=switch w/PoE Device B=VoIP Phone Cable A=CAT5 Cable B=CAT5 Network Device A? Network Device B? Cable Type A??? Cable Type B??? 10
12 You are troubleshooting a connectivity problemYou are troubleshooting a connectivity problem. PC1 is unable to affix to Server 1. PC2 and also PC3 do not have actually a problem. You suspect faulty cabling. Which troubleshooting action need to you perform first? Answer Choices: Use a wire crimper to encertain the cable ends are attached to cable between both pc1 and switch and also switch and also Sv1. (NO! Because everyone else can talk to Sv1!) Use a tone generator to test (NO! Since that’s for locating wiring.!) Use a media tester to test cable between PC1 and switch (YES!) Use a punchdown tool to test .(NO! Hello!) PC1 PC2 PC3 11 SV1
13 12 Properly attach tools making use of various cable kinds.None of the gadgets use auto-MIDI. Connection in between the two switches usage one upattach port and also one normal port. The connection between the switch and the router provides the switch"s uplink port. The connection between the COMPUTER and the rexternal is a consingle connection for router monitoring. Choices: straight-with, crossover, rollover Switch Switch Cable Type A??? Cable Type B??? Cable Type C??? Cable Type D??? My Answers: A= Straight B= Cross C= Straight D= Straight E= Cross F= Rollover Router Rexternal Cable Type F??? Cable Type E??? 12
14 What are the Public and also Private interdeals with and IP addresses on a rexternal using NAT?IPs are and (Trying to be tricky!) Net My answers: Private Rexternal (NAT) Switch Public 13
15 14. What is the binary format of the subnet mask for Port A on the router? What is the decimal format of the subnet mask for Subnet 1? You must connumber an IP address for Port B on the router. Assuming no various other IP addresses have been assigned, what is the initially obtainable IP you deserve to use? You should connumber an IP deal with for PC1. Assuming no various other IP addresses have actually been assigned, what is the last easily accessible IP? What is the broadcast resolve for Subnet 1? (My answers in bold) Subnet 1 = /26 /30 Rexternal Switch Port A Port B 14
16 My last score was a 79%. Needmuch less to say, I was shockedMy final score was a 79%. Needless to say, I was shocked! I believed I eliminated it with the potential of possibly lacking the weird VoIP hookup question. I didn’t execute any type of studying and also just took it on the fly. Overall, I believed it was an excellent test and also really enjoyed doing the hand-operated configurations in the start.
See more: How Long Does It Take For Model Magic To Dry Faster? Can I Paint Model Magic Before It Dries
I look forward to the next edition of the Netoccupational + test maybe being in this form of format. I hope this testimonial has actually been helpful!