JavaScript is disabled. For a far better experience, please enable JavaScript in your web browser before proceeding.

You are watching: Ruger 10/22 takedown scope mount


Got this ScopeNow I need to figure out what rings to usage through my 10/22 takedvery own.Burris Optics Fullarea II Riflescope 2-7x35mm - Ballistic Plex Reticle.Using supplied rail that came via gun.

A medium height set of Weaver 1" rings should work just fine. I prefer Weaver Quad lock rings …. they organize the scope securly and are exceptionally cost effective. Here"s a link: https://www.opticsearth.com/weaver-quad-lock.html?_iv_ring-height=medium&_iv_finish=gloss,matte
*

A few concerns with TDs that you might not be conscious of …. one is "repeatability" which indicates once you remove the barrel then reinstall it, POI may transition an inch or so. That"s bereason the scope is mounted on the receiver instead of the barrel and tbelow is just a tad of movement in the barrel-to-receiver mount. The receiver is aluminum so it"s easy to tighten the mounting screws as well a lot and sexpedition the threads in the receiver. So ….. do not apply excessive torque to the scope base screws!!!

Here"s my 10/22 practice build through a 3~10X42 Nighteater scope making use of Weaver Quad Lock rings. That"s a huge and also hefty scope but the rings hold it extremely secudepend.
A few concerns through TDs that you might not be aware of …. one is "repeatability" which indicates when you rerelocate the barrel then reinstall it, POI may transition an inch or so. That"s bereason the scope is mounted on the receiver instead of the barrel and tbelow is simply a tad of movement in the barrel-to-receiver mount. The receiver is aluminum so it"s easy to tighten the mounting screws also a lot and strip the threads in the receiver. So ….. do not use excessive torque to the scope base screws!!!
OK but simply be cautious and also use a tiny amount on the screw, not the holes, which are dilled all the way with the receiver. Loctite is incredibly runny and also will seep right into your bolt and also lock it up. I highly recommfinish rerelocating the bolt as soon as making use of Loctite then clean up any kind of excess prior to reassembling.
OK yet just be careful and usage a tiny amount on the screw, not the holes, which are dilled all the way with the receiver. Loctite is incredibly runny and will certainly seep right into your bolt and lock it up. I very recommfinish rerelocating the bolt once utilizing Loctite then clean up any type of excess before reassembling.

See more: Kylie Jenner Yellow Dress Off 61%, Kylie Jenner: Tube Mini Dress, Yellow Sandals


Mikey95hd, The scope base that came via your TD is intfinished for Weaver brand also or style rings. Assuming you usage the rings I recommended, the base will work-related simply fine. If you decide to usage Picatinny rings, you will certainly need a Picatinny base. BTW Picatinny is a traditional occurred for the army that have actually a locking slot width of 0.206" and are spaced eexceptionally 0.394" with a slot depth of 0.118". Weaver bases typically have actually just 2 cross slots which have actually a slot width of 0.180", so as you deserve to view, Weaver cross screws will certainly fit in a Picatinny base but Picatinny cross screws won"t fit in a Weaver base.The benefit of a Picatinny base (rail) is …. you have actually a lot more choices for placing your scope for the finest eye relief. As it turned out for the 10/22 in the above photo, the manufacturing facility base functioned excellent via my scope. This doesn"t constantly happen as a result of the distance between the turret and also front/rear lens bell.