From year come year, Cisco has actually updated many versions with distinction questions. The latest version is version 6.0 in 2018. What is your version? It relies on your instructor producing your class. We recommend you to go thought all variation if you are not clear. While girlfriend take virtual test through netacad.com, friend may obtain random inquiries from every version. Each version have 1 come 10 different questions or more. After ~ you review all questions, You need to practice with our online test system by walk to "Online Test" connect below.

You are watching: 2.2.5.5 packet tracer - configuring floating static routes

Version 5.02Version 5.03Version 6.0Online Assessment
Chapter 2 ExamChapter 2 ExamChapter 2 ExamOnline Test
Next Chapter
Chapter 3 ExamChapter 3 ExamChapter 3 ExamOnline Test 
2.2.2.4 Packet Tracer – Configuring IPv4 Static and also Default Routes
2.2.4.4 Packet Tracer – Configuring IPv6 Static and Default Routes
2.2.5.5 Packet Tracer – Configuring Floating revolution Routes
2.3.2.3 Packet Tracer – Troubleshooting revolution Routes

Packet Tracer – Configuring Floating Static courses (Answer Version)

Answer Note: Red font color or gray highlights indicate text that appears in the prize copy only.

Topology


*
*

2.2.5.5 Packet Tracer – Configuring Floating revolution Routes


Objectives

Part 1: Configure an IPv4 Floating revolution Route

Part 2: check Failover to the IPv4 Floating static Route

Part 3: Configure and also Test Failover because that an IPv6 Floating revolution Route

Background

In this activity, you will configure IPv4 and also IPv6 floating static routes. These courses are manually configured through an administrative distance better than the of the primary route and, therefore, would not it is in in the routing table till the primary route fails. You will test failover to the backup routes, and then regain connectivity come the major route.

Part 1: Configure an IPv4 Floating revolution Route

Step 1: Configure one IPv4 static default route.Configure a directly associated static default course from Edge_Router to the Internet. The major default route have to be v ISP1.Edge_Router(config)# ip route 0.0.0.0 0.0.0.0 s0/0/0Display the materials of the routing table. Verify that the default course is visible in the routing table.Edge_Router# show ip routeS* 0.0.0.0/0 is straight connected, Serial0/0/0What command is provided to map a path from a computer to a destination? tracertFrom PC-A, trace the path to the Web Server. The route need to start in ~ the default gateway 192.168.10.1 and go through the 10.10.10.1 address. If not, check your static default course configuration.PC> tracert 198.0.0.10Tracing route to 198.0.0.10 end a maximum of 30 hops:1 3 multiple sclerosis 0 ms 0 ms 192.168.10.12 0 multiple sclerosis 1 multiple sclerosis 0 ms 10.10.10.13 1 ms 2 ms 0 ms 198.0.0.10Trace complete.Step 2: Configure one IPv4 floating revolution route.What is the governmental distance the a static route? 0 for straight attached and also 1 for recursiveConfigure a directly associated floating static default path with an bureaucratic distance of 5. The course should allude to ISP2.Edge_Router(config)# ip route 0.0.0.0 0.0.0.0 s0/0/1 5View the running configuration and verify the the IPv4 floating static default path is there, and also the IPv4 static default route.Edge_Router# show runBuilding configuration…Current configuration : 781 bytes!ip route 0.0.0.0 0.0.0.0 Serial0/0/0ip route 0.0.0.0 0.0.0.0 Serial0/0/1 5Display the components of the routing table. Is the IPv4 floating static path visible in the routing table? Explain. No. The is not being displayed since it is not the major route. Routers will certainly only place the best path in the routing table and because this is the back-up route, it will just be clearly shows in the routing table once the main route go down.

Part 2: check Failover come the IPv4 Floating static Route

On Edge_Router, administratively disable the exit interface the the main route.Edge_Router(config)# interface s0/0/0Edge_Router(config-if)# shutdownVerify the the IPv4 floating static route is currently in the routing table.Edge_Router# show ip routeS* 0.0.0.0/0 is directly connected, Serial0/0/1Trace the route from PC-A come the Web Server.PC> tracert 198.0.0.10Tracing route to 198.0.0.10 over a best of 30 hops:1 0 ms 0 ms 0 ms 192.168.10.12 0 ms 0 multiple sclerosis 2 multiple sclerosis 10.10.10.53 0 ms 2 ms 0 ms 198.0.0.10Trace complete.Did the back-up route work? If not, wait a couple of more seconds for convergence and also then re-test. If the back-up route is still not working, investigate your floating static course configuration.Restore connectivity come the primary route.Edge_Router(config)# interface s0/0/0Edge_Router(config-if)# no shutdownTrace the course from PC-A to the Web Server to verify that the major route is restored.PC> tracert 198.0.0.10Tracing route to 198.0.0.10 over a preferably of 30 hops:1 3 multiple sclerosis 0 ms 0 ms 192.168.10.12 0 multiple sclerosis 1 ms 0 ms 10.10.10.13 1 multiple sclerosis 2 ms 0 ms 198.0.0.10Trace complete.

See more: How To Charge Any Bose Quietcomfort 35 Charging ? Verify Your Identity

Part 3: Configure and Test Failover to an IPv6 Floating revolution Route

Step 1: Configure an IPv6 floating revolution route.The IPv6 revolution default path to ISP1 is currently configured. Configure one IPv6 floating static default path with an bureaucratic distance of 5. The route should suggest to IPv6 resolve (2001:DB8:A:2::1) that ISP2.Edge_Router(config)# ipv6 course ::/0 2001:DB8:A:2::1 5View the to run configuration to verify that the IPv6 floating static default route is now detailed under the IPv6 revolution default route.Edge_Router# show runBuilding configuration…Current construction : 781 bytes!ipv6 route ::/0 2001:DB8:A:1::1ipv6 route ::/0 2001:DB8:A:2::1 5Step 2: test Failover come the IPv6 Floating revolution Route.On Edge_Router, administratively disable the leave interface of the main route.Edge_Router(config)# interface s0/0/0Edge_Router(config-if)# shutdownVerify the the IPv6 floating static path is currently in the routing table.Edge_Router# show ipv6 routeS ::/0 <5/0>via 2001:DB8:A:2::1Trace the course from PC-A to the Web Server.PC> tracert 2001:db8:f:f::10Tracing path to 2001:db8:f:f::10 end a preferably of 30 hops:1 1 ms 0 multiple sclerosis 0 ms 2001:DB8:1:10::12 0 ms 0 ms 1 ms 2001:DB8:A:2::13 13 ms 0 ms 1 multiple sclerosis 2001:DB8:F:F::10Trace complete.Did the backup route work? If not, wait a few more seconds for convergence and also then re-test. If the backup route is still no working, investigate your floating static path configuration.Restore connectivity to the major route.Edge_Router(config)# interface s0/0/0Edge_Router(config-if)# no shutdownTrace the path from PC-A come the Web Server come verify that the main route is restored.PC> tracert 2001:db8:f:f::10Tracing course to 2001:db8:f:f::10 end a maximum of 30 hops:1 0 ms 0 ms 0 multiple sclerosis 2001:DB8:1:10::12 1 ms 0 ms 1 ms 2001:DB8:A:2::13 1 multiple sclerosis 0 multiple sclerosis 1 multiple sclerosis 2001:DB8:F:F::10Trace complete.